Question 1

How to correctly apply preserver to my log cabin?

Accepted Answer

Timber is, by its very nature, a porous material. That means moisture can penetrate the wood and, in the right circumstances, this can lead to mould or even rot! Treating your log cabin with a high-quality wood preserver is essential to maintaining the lifespan of the timber.

You will need to treat the cabin both internally and externally to ensure the wood is completely protected, we recommend a minimum of two coats of preserver to your log cabin. You may be asking, why do I need to treat the inside? Our cabins are popular for their flexibility and there is a wide variety of uses for them, most of which involve someone being in the cabin. Heat from people, pets and electronics creates moisture which can lead to condensation. As timber is porous, this means moisture could be getting to the wood from the inside, as well as the outside. You can only treat the cabin after it is installed due to the precise machining of the joins, so do pay particular attention to the corners (inside and out!) and the notched areas as well as the bottom few logs.

Always conduct a test patch to ensure product suitability before applying preserver, and follow the manufacturer’s instructions on the container at all times.

Wood should be frost-free when treated, and the product should not be applied in damp conditions or if rain is expected. The cabin preserver is a ready-to-use product and should not be diluted. Ensure the temperature of both the wood and the product is between 10°C and 30°C.

For professional use, the product can be applied by dipping or flow coating using specialised facilities and equipment, or by spraying in enclosed devices. For standard DIY use, apply the product with a synthetic brush.

- Always follow the guidance from the preserver supplier!

- Stir the product thoroughly before use.

- Apply the wood preserver with a synthetic brush, spreading it thinly and evenly along the wood grain.

- Apply 2–3 coats depending on the wood species and surface characteristics, allowing 6 hours between coats.

- Drying time is approximately 6 hours under normal conditions (20°C / 65% relative humidity). Low temperatures, high humidity, or certain wood types may extend drying time.

- Ensure good ventilation when handling the product and when drying freshly treated wood.

- Keep freshly treated wood covered or protected from rain until fully dry.

- When applying to in-situ timbers and while surfaces are drying, avoid contaminating soil and surface waters with the product.

- Prevent release into the environment; do not empty into drains or allow the product to reach aquatic environments, soil, or the sewer system.

- Protect soil, plants, and water sources from splashes of the product.

Question 2

How much preserver do I need for my log cabin?

Accepted Answer

When estimating how much preserver you’ll need for your log cabin, it depends on the size and the level of coverage you desire. To get started, our 5-litre tins should provide ample coverage for most small to medium-sized cabins. Generally, 5 litres will cover approximately 20 to 40 square metres with one coat, but for best results, applying two coats is recommended. Larger cabins or sheds might require additional tins, so it's always a good idea to measure your structure's surface area and plan accordingly.

Question 3

How many coats of preserver should I apply to my log cabin?

Accepted Answer

For optimal protection, we recommend applying two coats of preserver to your log cabin. The first coat provides a solid base, ensuring that the wood is well protected, while the second coat enhances durability and ensures even coverage. This double application helps to guard against weathering, rot, and insect damage, ensuring your cabin stays in great condition for years to come. Our 5-litre tins are typically enough to get you started on this process, depending on the size of your structure.

Question 4

How much surface area per litre does the preserver cover?

Accepted Answer

The surface area coverage per litre of our recommended Protek Wood Preserver is approximately 8 square metres. This means that a single litre of preserver should cover roughly 8m² with one coat, depending on the porosity and condition of the wood. To ensure complete and effective protection, it's advisable to calculate the total surface area of your shed or log cabin and plan for two coats where possible.

Question 5

How do I prepare my log cabin for preserver?

Accepted Answer

Before treating the log cabin the wood surface must be clean, dry, and free from dust, dirt, or any other contaminants before treatment.

If you are using the preserver after the building has already previously been treated, remove all previous coatings entirely by sanding back to bare wood or using a dedicated wood stripper.

Ensure when applying this product, appropriate protective clothing, including safety goggles and nitrile rubber gloves are worn.

Question 6

Why do I need to use preserver on my Log Cabin?

Accepted Answer

Timber is, by its very nature, a porous material. That means moisture can penetrate the wood and, in the right circumstances, this can lead to mould or even rot! Treating your log cabin with a high-quality wood preserver is essential to maintaining the lifespan of the timber.

You will need to treat the cabin both internally and externally to ensure the wood is completely protected. You may be asking, why do I need to treat the inside? Our cabins are popular for their flexibility and there is a wide variety of uses for them, most of which involve someone being in the cabin. Heat from people, pets and electronics creates moisture which can lead to condensation. As timber is porous, this means moisture could be getting to the wood from the inside, as well as the outside. You can only treat the cabin after it is installed due to the precise machining of the joins, so do pay particular attention to the corners (inside and out!) and the notched areas.

Treating your cabin with a high-quality preserver annually also allows you to take advantage of our fantastic 10 Year Timber Guarantee.

Powersheds Cabin Preserver

Powersheds Cabin Preserver

Configure & Buy

Size:

Size:

All you need to know about Powersheds Cabin Preserver

Secure & Flexible Payment options

Free & Fast Delivery

Customer Help Centre

Powersheds Cabin Preserver

Powersheds Cabin Preserver

Configure & Buy

Size:

Details

Delivery & Returns

Size:

How to correctly apply preserver to my log cabin?

How much preserver do I need for my log cabin?

How many coats of preserver should I apply to my log cabin?

How much surface area per litre does the preserver cover?

How do I prepare my log cabin for preserver?

Why do I need to use preserver on my Log Cabin?

Secure & Flexible Payment options

Free & Fast Delivery

Customer Help Centre